Anchor line, also known as skirting board or skirting board, is an important structural node at the intersection of ground and wall. The anchor line can protect the wall to prevent the wall from being dirty when carrying things, walking or cleaning. Another function of skirting line is decoration. In room design, waist line and anchor line play a role of visual balance and beauty. Next, let's take a look at the installation steps of the anchor line

Installation steps of foundation line

Step 1: measure the length and prepare the material

The length of the anchor line is fixed, and the length of the anchor line used in each block is different. Therefore, it is necessary to measure the length of the anchor line used in each section first.

Step 2: cut the anchor line

After determining the required length of the anchor line with tape measure and pencil, cut it with sawtooth and other tools.

Step 3: install the anchor line

The foundation line is generally installed after the wall surface and foundation line are completed. The length of the anchor line has been reserved in the floor before the installation of the anchor line, and then the length of the anchor line has been reserved in the floor before the installation of the anchor line.

Step 4: anchor line corner treatment

The anchor line at the corner of the wall is generally cut by cutting the edge of the corner into 45 degrees, and then assembled and fixed. The effect of this treatment makes the anchor line still natural and beautiful at the corners.

Step 5: fix the anchor line

Although the anchor line is stuck in the joint, measures need to be taken to make it more fixed. The tools needed to fix the anchor line are mainly floor nails and hammers. Fix the anchor line, and then nail the floor into the anchor line to make the anchor line fixedly connected with the wall.